The Printer Stops During A Print Job - Canon IPF8400S Basic Manual

iPF8400S Basic Guide

The printer stops during a print job

An error message is shown on the Display Screen ...................................................................................... 112
The printer ejects blank, unprinted paper ..................................................................................................... 112
An error message is shown on the Display Screen
The last portion of roll paper was used during a print job,
and paper could not be advanced because the trailing edge
is taped to the roll.
The printer ejects blank, unprinted paper
Cause
The leading edge of the roll paper
was cut to straighten it.
The Printhead nozzles are
clogged.
A print job was received from an
incompatible printer driver.
The printer is damaged.
112
Cause
The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a
value other than Off in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")➔User's Guide
Print a test pattern to check the nozzles and make sure the Printhead is in good
condition for printing.
(See "Checking for Nozzle Clogging.")➔User's Guide
Use the correct imagePROGRAF printer driver for the printer and try printing again.
Contact your Canon dealer for assistance.
Corrective Action
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")➔P.18
(See "Removing Rolls From the Roll Holder.")➔User's
Guide
(See "Loading and Printing on Rolls.")➔User's Guide
Corrective Action