Canon IPF8400S Basic Manual page 68

iPF8400S Basic Guide
First Level Second Level
▶ Length Unit
▶ Detect Mismatch
▶ Paper Size Basis
▶ Keep Paper Size
▶ Rep.P.head Print
▶ Nozzle Check
▶ CarriageScanWdth
▶ Use RemoteUI (*8)
▶ Reset PaprSetngs (*8)
▶ Erase HDD Data
▶ Output Method
▶ Print After Recv
▶ Common Box Set.
(*4) (*8)
▶ Show Job Log (*8)
▶ Use Take-up Reel
Take-up Reel
(*12)
▶ Auto Feed (*13)
▶ Skip Take-Up Err
(*14)
▶ Level 1 ┋ Level 2 ┋ Level 3
Prep.MovePrinte
r
▶ Change Password
Admin. Menu
(*9) (*9)
▶ Init.Admin.Pswd (*9)
Adj. Fine Feed (*15) (*16)
▶ Paper Info
Printer Info (*15)
▶ Ink Info
▶ Head Info
▶ System Info
▶ Error Log
▶ Other Counter
*1: Available after you have used Standard or Initial adjustmt in Head Posi. Adj. once.
*2: Available if Adj. Priority is Automatic or Print Quality.
*3: Available if Adj. Priority is Automatic or Print Length.
*4: Not displayed if IPv4 Mode is Manual.
*5: Not displayed if NetWare is Off.
*6: Not displayed if Auto Detect is On.
*7: Follows the setting in Date Format.
*8: Viewing and configuration is possible for administrators, and only viewing for other users.
*9: Viewing and configuration is possible for administrators only.
*10:Not displayed if IPv6 Support is Off.
*11:Default setting for the time to enter the power save mode/Sleep mode is recommended.
*12:Displayed only when the Media Take-up Unit is attached.
*13:Available ifUse Take-up Reel is Enable, (b) roll paper is loaded, and (c) you have not executed Auto Feed for the loaded
roll.
68
Third Level
-9:Alaska(AKST) ┋ -8:Oregon (PST) ┋ -7:Arizona(MST) ┋ -6:Texas (CST) ┋ -5:NewYork(EST) ┋
-4:Santiago ┋ -3:Buenos Aires ┋ -2: ┋ -1:Cape Verde
▶ meter* ┋ feet/inch
▶ Pause ┋ Warning ┋ None* ┋ Hold Job
▶ Sht Selection 1 ▶ ISO A3+* ┋ 13"x19"(Super B)
▶ Sht Selection 2 ▶ ISO B1* ┋ 28"x40" (ANSI F)
▶ Off* ┋ On
▶ Off ┋ On*
▶ Frequency ▶ Standard* ┋ 1 page ┋ 10 pages ┋ Off
▶ Warning ▶ Off* ┋ On
▶ Automatic* ┋ Fixed
▶ On* ┋ Off
▶ High Speed (*8) ┋ Secure High Spd. (*8) ┋ Secure (*8)
▶ Print* ┋ Print (Auto Del) ┋ Save: Box XX
▶ Off* ┋ On
▶ Print* ┋ Print (Auto Del)
▶ Off ┋ On*
▶ Disable* ┋ Enable
▶ Off* ┋ On
▶ (The screen for setting the password is displayed)
▶ ProductName:
▶ s/n:
▶ Days elapsed:
▶ Count [Mdot]:
▶ Printhead L ▶ ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
▶ Printhead R ▶ ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
Fourth Level Fifth Level Sixth Level Seventh
Level