Paper Loaded Askew; Cannot Detect Papr; Cannot Feed Paper - Canon IPF8400S Basic Manual

iPF8400S Basic Guide
Cause

Paper loaded askew.

Paper loaded crooked was detected when the paper was advanced.
• To disable this message (if it is displayed repeatedly despite reloading paper, for example),
choose Off or Loose in the Skew Check Lv. setting of the printer menu. However, this may
Important
cause jams and printing problems because paper may be askew when printed. Also, the Platen
may become soiled, which may soil the back of the next document when it is printed.

Cannot detect papr

The printer could not detect the paper.

Cannot feed paper.

Cause
Paper could not be advanced
correctly during feeding.
140
(See "Loading Sheets in the Printer.")➔P.21
3. If Not finished printing. Finish printing remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on which the error occurred.
Cause
Cause
1. Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")➔P.102
(See "Clearing a Jammed Sheet.")➔P.105
2. Load paper.
3. Lower the Release Lever.
4. If Not finished printing. Finish printing remaining jobs? is shown on the
Display Screen, press the OK button.
Corrective Action
Lift up the Release Lever and reload the
paper.
(See "Loading Rolls in the Printer.")➔
P.14
(See "Loading Sheets in the Printer.")➔
P.21
If this error recurs after you reload the
roll, remove the Roll Holder from the
printer, push the roll firmly in until it
touches the Roll Holder flange, and
reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to
Rolls.")➔P.12
Corrective Action
Reload the paper as follows.
1. Remove the paper and press the OK button.
2. Reload the paper.
(See "Loading Sheets in the Printer.")➔P.21
(See "Loading Rolls in the Printer.")➔P.14
Corrective Action
Corrective Action