Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets; Paper Is Not Cut Straight - Canon IPF8400S Basic Manual

7
If the Carriage is on the left, move the Carriage
to the right until it stops.
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error
Important
8
Lower the Release Lever and close the Top
Cover.
9 Turn the printer on. (See "Turning the Printer On and Off.")➔User's Guide

Roll paper cannot be inserted into the paper feed slot

The roll paper is warped.
Paper is jammed by the paper feed slot.
The paper source selection is incorrect.

Cannot load sheets

The paper source selection is incorrect.

Paper is not cut straight

Cause
The paper is bent or curled at the cut
may occur when you turn on the printer.
Cause
Cause
Straighten out any curling by the edges of the paper.
Corrective Action
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")➔P.102
(See "Clearing a Jammed Sheet.")➔P.105
Press the Load button and select the paper source.
Corrective Action
Press the Load button and select the paper source.
Corrective Action
iPF8400S Basic Guide
107