Canon IPF8400S Basic Manual page 54

iPF8400S Basic Guide
1
On the Tab Selection screen of the Control
Panel, press ◀ or ▶ to select the Settings/Adj.
tab ( ).
Note
2 Press the OK button.
The Set./Adj. Menu is displayed.
Press ▲ or ▼ to select Maintenance, and then press the OK button.
3
Press ▲ or ▼ to select Repl. S. Cleaner, and then press the OK button.
4
The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.
5
Open the Top Cover.
Note
6
Hold the Shaft Cleaner on the right side of the
Carriage by the grips (a) and pull it to the right to
remove it.
54
• If the Tab Selection screen is not displayed, press the Menu button.
• If you do not respond within two minutes, shaft cleaner replacement is canceled. In this
case, repeat the procedure.