Cannot Cut This Paper; End Of Paper Feed; Rel Lever Is In Wrong Position - Canon IPF8400S Basic Manual

Cause

Cannot cut this paper.

Cause
There are sheets left on the
Ejection Guide.
There is a foreign object by the
Output Tray, obstructing the
Cutter Unit.
You are not using the printer
under the recommended
environmental conditions for the
paper.
You are using paper that is not
compatible with automatic cutting.
In other cases, the Cutter Unit
may be damaged.

End of paper feed.

Although an attempt was made to advance the paper manually, it
reached the limit position that can be advanced.
Paper can be retracted only up to 17 mm (0.7 in) when using the Media
Take-up Unit.

Rel lever is in wrong position.

Cause
The Release Lever is up.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")➔P.14
(See "Loading Sheets in the Printer.")➔P.21
1. Lift the Release Lever and remove the paper.
2. Load paper.
3. Lower the Release Lever.
4. If Not finished printing. Finish printing remaining jobs? is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")➔P.14
1. Lift the Top Cover and remove the foreign object.
2. If Not finished printing. Finish printing remaining jobs? is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper
are met. Note that various environmental conditions are recommended for various
types of paper. For details on the recommended environmental conditions, see the
Paper Reference Guide.
(See "Paper Reference Guide.")
1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")➔User's Guide
For information about paper that is compatible with automatic cutting, see the
Paper Reference Guide.
(See "Paper Reference Guide.")
2. Lift the Release Lever and remove the paper.
Contact your Canon dealer for assistance.
Cause
Corrective Action
Corrective Action
Canceling manual advancing.
(See "Feeding Roll Paper Manually.")➔User's
Guide
Canceling manual advancing.
Corrective Action
Lower the Release Lever.
If the error occurs again, turn off the printer and wait a while
before restoring power.
iPF8400S Basic Guide
Corrective Action
141