Troubleshooting > Troubleshooting
Message
System error.
T
The cover is open.
The slit glass requires
cleaning.
This memory is not
formatted.
This user account is
locked out.
Toner [C][M][Y][K] are
empty.
Toner is low. [C][M][Y][K]
(Replace when empty.)
U
Unknown toner installed.
Unknown Toner Installed.
PC [C][M][Y][K]
W
Warning low memory.
Waste toner box is full.
Waste toner box is not
installed.
Y
You cannot use this box.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on Auto
Error Clear, refer to the following:
Auto Error Clear (page 8-41)
Checkpoints
—
Is the top cover of the document
processor open?
Is there any cover which is open?
—
Is the removable memory formatted by
this machine?
—
—
—
Is the installed toner container our own
brand?
Does the installed toner container's
regional specification match the
machine's?
—
Is the waste toner box full?
—
—
Corrective Actions
System error has occurred. Follow the
instructions on the screen.
Close the document processor cover.
Close the cover indicated on the screen.
Clean the slit glass using the cleaning
cloth supplied with the document
processor.
Perform [Format] on this machine.
Contact administrator.
Job is canceled. Select [End].
Replace the toner container to our
specified toner container.
NOTE
If the color toner is empty but the black
toner is remained, the machine
continues printing in black and white by
selecting [Print in Black and White] of
Color Toner Empty Action.
It is almost time to replace the toner
container. Obtain a new toner container.
We will not be liable for any damage
caused by the use of third party supplies
in this machine.
Install the specified container.
Cannot start the job. Try again later.
Replace the waste toner box.
The waste toner box is not installed
correctly. Set it correctly.
You cannot use the specified box. Job is
canceled. Select [End].
10-26
Reference
Page
—
―
page 10-3
page 7-11
—
page 10-4
―
―
―
—
page 10-7
page 10-7
—