Confirmation Screen Of Destinations; Recall - Kyocera TASKalfa 306ci Operation Manual

Operation on the Machine > Handling Destination

Confirmation Screen of Destinations

When selecting [On] for Destination Check before Send, the confirmation screen of destinations appears after pressing
the [Start] key.
Dest. Check before Send (page 8-23)
Follow the steps below to confirm the destinations.

Recall

Recall is a function allowing you to send the last entered destination once again. When you want to send the image to
the same destination, select [Recall], and you can call the destination you sent on the destination list.
1
2
Check the destinations and press [Check].
Destinations Check
A OFFICE 1234567890
2345678901
B OFFICE
C OFFICE 3456789012
4567890123
D OFFICE
Close Cancel
1
Select [ ] or [ ] to confirm all destination.
Selecting [ ] shows the detailed information of the selected destination.
To delete the destination, select the destination you want to delete > [
To add the destination, select [Cancel] and then return to the destination screen.
2
Select [Check].
NOTE
Be sure to confirm all destination by displaying them on the touch panel. You cannot
select [Check] unless you have confirmed all destination.
Select [Recall].
The destination you sent is displayed on the destination list.
NOTE
When the last sending included FAX, folders and E-mail destinations, they are also
displayed. If necessary, add or delete the destination.
Press the [Start] key.
Sending starts.
NOTE
• When [On] is selected in "Dest. Check before Send", a destination confirmation screen is
displayed when you press the [Start] key.
Confirmation Screen of Destinations (page 5-39)
• Recall information is canceled in the following conditions.
- When you turn the power off
- When you send a next image (new recall information is registered)
- When you log out
10:10
1/2
Check
5-39
] > [Yes]