1
I When <Staple> is set:
The copies are automatically collated into sets arranged in page order and automatically
stapled. The output is as shown below.
• If you select [Corner] (Top Left Staple):
Originals
Three Sets of
Specified Copies
1
2
• If you select [Double] (Left Staple):
Originals
Three Sets of
Specified Copies
1
2
• If you select [Saddle Stitch]:
Originals
Three Sets of
Specified Copies
8
1
IMPORTANT
•
[Staple] can only be specified when the machine is equipped with the Finisher (optional).
•
You cannot set the Staple mode when copying on transparencies, tracing paper, or labels.
•
When the machine is operating in the Saddle Stitch mode, you cannot use the Remote and Cascade
copy, Hole Punch, Two-page Separation, Cover/Sheet Insertion, Image Combination, Image
Separation, Booklet, Transparency Interleaving, Form Composition, and Page Numbering modes.
•
Folds may appear differently depending on the type or quantity of paper.
•
[Saddle Stitch] can only be selected when the Saddle Finisher-F2 (optional) is attached.
Copy Set 1
3
4
Copy Set 1
3
4
Copy Set 1
6
3
Copy Set 3
Copy Set 2
Copy Set 2
Copy Set 3
Copy Set 3
Copy Set 2
Collating Copies (Finisher)
1
1-57