Making One-sided Copies from Two-sided Originals
(2 1-Sided)
This feature automatically turns over two-sided originals placed in the feeder, to make
one-sided copies.
Original
1
IMPORTANT
•
Place the originals horizontally when copying A4R or A5R-sized originals. If these originals are placed
vertically, the back sides of the copies will be printed upside down.
NOTE
•
To copy two-sided originals placed on the platen glass, use the Job Build mode. (See "Copying
Separately-Set Originals (Job Build)", on p. 2-49.)
1
Place your originals in the feeder, and press [Two-sided].
NOTE
•
1-76
Two-Sided Copying (Two-sided)
When <Auto Collate> is set to <On>, the Collate mode or the Offset Collate mode is
automatically set when you place the originals in the feeder. (See "Setting Automatic Collate",
on p. 3-5.)
Copies
1