NOTE
•
•
•
1
•
G If the following screen is displayed:
Follow the instructions on the touch panel display, and press
original. When scanning is complete, press [Done].
1-14
Flow of Copy Operations
If there is a current job, the machine scans the original, and waits to print it. Printing starts when
the current job is complete.
When the copy has been made, remove it from the output tray.
If the Card Reader-C1 (optional) is attached, remove the Control Card. (See "Chapter 7 Handling
Optional Equipment" in the Reference Guide.)
If you have set up Department ID Management, press
Using This Machine" in the Reference Guide.)
. (See "Chapter 1 Before You Start
ID
one time for each
1