Dividing an Original Into Equal Sections and
Enlarging Each Section on a Separate Copy
Sheet
(Image Separation)
This mode automatically divides an original into equal sections, and copies each section in an
enlarged form on a separate sheet of paper.
The following two Image Separation features are available: 1 to 2 (1-sided and 2-sided copies), and
1 to 4 (1-sided and 2-sided copies).
2
IMPORTANT
•
When the machine is operating in the Image Separation mode, you cannot use the Entire Image, Saddle
Stitch, Two-sided, Two-page Separation, Cover/Sheet Insertion, Image Combination, Shift (No. Key
Entry), Booklet, Transparency Interleaving, Different Size Originals, Frame Erase, Image Repeat, Form
Composition, and Scan Image Check modes.
•
If you use the Image Separation with the remote or cascade copy mode, the layout of the final page of
the original cannot be set.
•
Originals copied using the Image Separation mode must all be the same size. You cannot use the
Different Size Originals mode in combination with the Image Separation mode.
•
Place the original on the platen glass. You cannot copy an original in the Image Separation mode from
the feeder.
NOTE
•
The enlargement ratio is automatically set to match the designated paper size.
I 1 To 2
Divides a one-sided original into two equal sections, and outputs the sections in an enlarged
form as two, 1-sided copies or one, 2-sided copy.
Original
1
NOTE
•
You can place A4-size originals horizontally or vertically when using this feature. When placed vertically,
each page is divided into upper and lower sections.
2-42
Dividing an Original Into Equal Sections and Enlarging Each Section on a Separate Copy Sheet
(Image Separation)
2
Copies
or
1
2
1