4
Press
Copying starts.
NOTE
•
•
Making Copies by Erasing Binding Holes
(Binding Erase)
2
1
Place your original on the platen glass, and press [Special Features] →
[Frame Erase] in this order.
IMPORTANT
•
2
Press [Binding Erase] and designate the area of the binding holes on
the original.
The position of the binding holes refers not to the position in which the original is placed on the
platen glass, but to the position of the binding holes when the surface of the original that you want
to scan is viewed as face up, with the top edge at the top.
2-34
Erasing Shadows and Frame Lines from Copies (Frame Erase)
.
To cancel this setting, press [Special Features] → [Frame Erase] → [Cancel] in this order.
To cancel all settings and return the machine to the Standard mode, press
Do not place originals with binding holes in the feeder, as this may damage the originals.
1
.