Table of Contents
Advertisement
3-28 Firmware User Guide
The IP Profile Parameters screen, found under the WAN Configuration menu, Add/Change Connection Profile
screen, appears as shown.
Address Translation Enabled:
IP Addressing...
NAT Map List...
NAT Server List...
NAT Options...
Stateful Inspection Enabled:
Local WAN IP Address:
Local WAN IP Mask:
Filter Set...
Remove Filter Set
RIP Profile Options...
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
If you select NAT Options, in either case, the NAT Options screen appears.
IP Passthrough Enabled:
Toggle ON to allow local WAN IP address to be used on LAN in addition to NAT.
If you toggle IP Passthrough Enabled to Yes, additional field(s) appear.
IP Profile Parameters
Yes
Numbered
Easy-PAT List
Easy-Servers
No
0.0.0.0
0.0.0.0
NAT Options
No
Advertisement
Table of Contents
