Netopia Firmware 4000-Series Software Manual page 31

Changing a Frame Relay DLCI configuration
To modify a Frame Relay DLCI configuration, select Display/Change DLCIs in the Frame Relay DLCI
Configuration screen.
Select a DLCI Name from the table and press Return to go to the Change DLCI screen. The parameters in this
screen are the same as the parameters in the Add DLCI screen. To find out how to set them, see
Frame Relay DLCI configuration" on page
DLCI Name:
DLCI Enabled:
DLCI Number (16-991):
Remote IP Address:
2-14.
Change DLCI
DLCI 33
Yes
32
2.0.0.2
WAN and System Configuration 2-13
"Adding a