Netopia Firmware 4000-Series Software Manual page 188

6-36 Firmware User Guide
Address Translation Enabled:
IP Addressing...
NAT Map List...
NAT Server List...
Local WAN IP Address:
Local WAN IP Mask:
Remote IP Address:
Remote IP Mask:
Filter Set...
Remove Filter Set
Multicast Forwarding...
RIP Profile Options...
Typically, you will have a Connection Profile that you created in Easy Setup. You may have more. Select the
Connection Profile that you want to use from the Display/Change Connection Profile menu, and then select IP
Profile Parameters.
By default, Multicast Forwarding is turned off (None) on Connection Profiles until you enable a specific
Connection Profile to receive multicast data. You enable it by selecting Rx. from the pull-down menu.
IP Profile Parameters
Yes
Numbered
Easy-PAT List
Easy-Servers
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
+----------------+
+----------------+
| None
| Rx.
+----------------+
|
|