Multiple Data Link Encapsulation Settings
4.
Select Encapsulation Options and press Return.
❥
If you selected ATMP, PPTP, L2TP, or IPSec, see
If you selected PPP or RFC1483, the screen offers different options:
❥
Profile Name:
Profile Enabled:
Encapsulation Type...
RFC1483 Mode...
IP Profile Parameters...
COMMIT
If you selected RFC1483, the screen allows you
❥
to choose Bridged 1483 or Routed 1483.
If you are using PPP, when you select Encapsulation Options, the Datalink (PPP/MP) Options screen
appears. (RFC1483 does not require these options and does not offer the menu selection.)
Add Connection Profile
Profile 1
Yes
+--------------+
+--------------+
| Bridged 1483 |
| Routed 1483
+--------------+
CANCEL
Chapter 4, "Virtual Private Networks (VPNs)."
Profile Name:
Profile Enabled:
Encapsulation Type...
Underlying Encapsulation...
PPP Mode...
|
Encapsulation Options...
IP Profile Parameters...
Interface Group...
COMMIT
Configure a new Conn. Profile. Finished? COMMIT or CANCEL to exit.
If you selected PPP, the screen allows you to
❥
choose PPPoE or None as the Underlying
Encapsulation.
❥
If you choose None, the PPP Mode offers the
choice of VC Multiplexed or LLC SNAP.
WAN and System Configuration 2-25
Add Connection Profile
Profile 1
Yes
PPP
None
VC Multiplexed
Primary
CANCEL