Table of Contents
Advertisement
3-22 Firmware User Guide
■
Select NAT Map List and press Return. A pop-up menu displays a list of your defined map lists.
Address Trans| Easy-PAT
IP Addressing| my_map
NAT Map List.|
NAT Server Li|
Local WAN IP |
Remote IP Add|
Remote IP Mas|
Filter Set...|
Remove Filter|
Receive RIP: |
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
■
Select the map list you want to bind to this Connection Profile and press Return. The map list you selected
will now be bound to this Connection Profile.
Select NAT Server List and press Return. A pop-up menu displays a list of your defined server lists.
■
Address Trans| Easy-Servers
IP Addressing| my_servers
NAT Map List.|
NAT Server Li|
Local WAN IP |
Local WAN IP |
Remote IP Add|
Remote IP Mas|
Filter Set...|
Remove Filter|
Receive RIP: |
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
Select the server list you want to bind to this Connection Profile and press Return. The server list you
■
selected will now be bound to this Connection Profile.
Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask
fields' visibility are dependent only on the IP Addressing type.
IP Profile Parameters
+--NAT Map List Name---+
+----------------------+
| <<None>>
|
|
|
|
|
+----------------------+
IP Profile Parameters
+-NAT Server List Name-+
+----------------------+
| <<None>>
|
|
|
|
+----------------------+
|s
|mbered
|
|sy PAT
|
|
|
|
|7.0.0.2
|5.255.255.255
|
|tBIOS Filter
|
|
|th
|
|s
|mbered
|
|sy PAT
|
|
|0.0.0
|0.0.0
|7.0.0.2
|5.255.255.255
|
|tBIOS Filter
|
|
|th
|
Advertisement
Table of Contents
