Table of Contents
Advertisement
2-18 Firmware User Guide
Quality of Service (QoS) settings
■
Select the QoS (Quality of Service) setting from the pop-up menu: UBR. or CBR.
UBR: No configuration is needed for UBR VCs. Leave the default value 0 (maximum line rate).
CBR: One parameter is required for CBR VCs. Enter the Peak Cell Rate that applies to the VC. This
value should be between 1 and the line rate. You set this value according to specifications defined by
your service provider.
Circuit Name:
Circuit Enabled:
Circuit VPI (0-255):
Circuit VCI (32-65535):
QoS...
Peak Cell Rate (0 = line rate):
Use Connection Profile...
Use Default Profile for Circuit
ADD Circuit NOW
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
■
The Peak Cell Rate field is editable. Netopia Firmware Version 5.4 supports two ATM classes of ser-
vice for data connections: Unspecified Bit Rate (UBR) and Constant Bit Rate (CBR). You can configure
these classes of service on a per VC basis. The default ATM class of service is UBR.
Then, select a Connection Profile for the Circuit. To use the Default Profile, select Use Default Profile
■
for Circuit and press Return. For other options, select a profile from the Use Connection Profile
pop-up menu.
Add Circuit
Circuit 2
Yes
0
32
CBR
0
Default Profile
CANCEL
Advertisement
Table of Contents
