5-16 Firmware User Guide
If you return to the IP Profile Parameters screen, two new fields are displayed:
Remote Tunnel Endpoint:
Add Network...
Display/Change Network...
Delete Network...
Address Translation Enabled:
Filter Set...
Remove Filter Set
Advanced IP Profile Options...
Enter the IP Address or hostname of the remote tunnel endpoint.
Display/Change Network allows you to make changes to existing network configurations you have made. If
■
you select Display/Change Network, a list of your configured networks displays.
--------------Local-Members-------------------------Remote-Members--------------
Net #---Type----Start-Address---Size----------Type----Start-Address---Size------
----------------------------------SCROLL UP-----------------------------------
1
SUBNET
2
SUBNET
3
HOST
4
RANGE
---------------------------------SCROLL DOWN----------------------------------
■
Scroll down and up with the arrow keys to select the one you want to change, and press Return. You will be
returned to the Network Configuration screen where you can make any required changes.
If you select Delete Network in the IP Profile Parameters screen, the same scrolling list will display. When
■
you select one of the networks and press Return, a warning screen will ask you to confirm your choice:
IP Profile Parameters
COMMIT
Display/Change Network Configuration
192.168.2.1
/24
10.0.1.1
/8
163.176.91.101
-
163.176.30.222
21
0.0.0.0
No
<<None>>
CANCEL
SUBNET
192.168.1.0
SUBNET
10.0.0.1
HOST
163.176.91.100
RANGE
163.176.91.100
/24
/8
-
100