Table of Contents
Advertisement
8-2 Firmware User Guide
central office, but not long distance or local calls.
Toll Restriction Operation - PBX/Local Switching Mode: When you pick up the phone, you receive local PBX
dial tone. When a 9 (or outside line code) is pressed, the IAD detects the digit and returns busy (locally
generated). Incoming calls are allowed. Extension calls (locally switched) are allowed.
■
Speed Dial - Centrex Mode: In Centrex Mode, when you pick up the phone, dial-tone from the central office
is present. It is therefore, not possible to program the phone or use speed dial in this mode from the
phone.
Speed Dial - PBX/Local Switching mode: In this mode, you have the ability to pick up the phone, receive
local dial tone and proceed to program the phone w/ local speed dial options. In addition, taking the phone
off hook and pressing speed dial numbers will cause the stored speed dial digits to be sent out. This is
independent of the previous mode.
Configuring the Voice Features
This section describes how to configure the voice telephone features in Netopia Firmware Version 5.4.
From the Main Menu select Voice Configuration.
Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.
The Voice Configuration screen appears.
Netopia IAD
Easy Setup...
WAN Configuration...
System Configuration...
Voice Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Advertisement
Table of Contents
