13-9
FUEL SYSTEM AND THROTTLE BODY
• Disconnect the condenser coupler and remove the condenser
5.
• Loosen the throttle body clamp screws and remove the throt-
tle body assembly.
DISASSEMBLY
• Remove the hot starter valve 1 and spring 2 from the hot
starter cable.
• Remove the fuel hose 3 and starter knob/idle screw 4.
Be sure to disconnect the fuel hose 3 by your hand.
You may not disconnect the fuel hose 3 with any tool.
Do not turn the starter knob/idle screw 4 unless it is
necessary.
• Remove the TP sensor 5 using the special tool.
NOTE:
Prior to disassembly, mark the sensor original position with a
paint or scribe for accurate reinstallation.
% 09930-11950: Torx wrench (T25)
CAUTION