Semi-Conductor Equipped Part; Connecting The Battery; Wiring Procedure - Suzuki RM-z450 Owner's Service Manual

15-3 ELECTRICAL SYSTEM

SEMI-CONDUCTOR EQUIPPED PART

• Be careful not to drop the part with a semi-conductor built in
such as a ECM.
• When inspecting this part, follow inspection instruction strictly.
Neglecting proper procedure may cause damage to this part.

CONNECTING THE BATTERY

WHEN USING THE BATTERY LEAD WIRE (Optional part:
36890-28H00)
• When disconnecting terminals from the battery for servicing,
be sure to disconnect the - battery lead wire, first.
• When connecting the battery lead wires, be sure to connect
the + battery lead wire, first.

WIRING PROCEDURE

Properly route the wire harness according to the "WIRING
HARENESS ROUTING" section. (!20-19, -20)
INCORRECT