Oil Pump No.1 And No.2 Inspection - Suzuki RM-z450 Owner's Service Manual

OIL PUMP No.2
• Drain engine oil. (!2-11)
• Remove the gearshift lever. (!9-3)
• Remove the magneto cover. (!15-17)
• Remove the oil pump No.2 cover 1.
• Remove the snap ring 2 and oil strainer No.2 3 from the oil
pump No.2 cover 1.
" 09900-06108: Snap ring pliers
Oil strainer inspection (!2-13)
• Remove the oil pump No.2 shaft 4, pin 5, inner rotor 6 and
outer rotor 7.

OIL PUMP No.1 AND No.2 INSPECTION

• Check the oil pump with each part for any defects or wear.
• If necessary, replace the defective parts with a new one.
LUBRICATION SYSTEM 11-6