Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
Hardware Description
Front Panel
The WAG302 front and rear hardware functions are described below.
Figure 2-1: WAG302 front panel
The following table explains the LED indicators:
LED
DESCRIPTION
PWR
Power Indicator
Off
No power.
On
Power is on.
TEST
Self Test Indicator
Blink
Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going off.
100
Ethernet LAN Speed Indicator
Off
Indicates 10 Mbps Ethernet link detected
Green On
100 Mbps Fast Ethernet link detected.
2-6
202-10078-01
Introduction