Table of Contents
Advertisement
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
Note: If you use a wireless computer to configure WEP settings, you will be
disconnected when you click Apply. Reconfigure your wireless adapter to match the
new settings or access the wireless access point from a wired computer to make any
further changes.
How to Configure WPA with Radius
Note: Not all wireless adapters support WPA. Furthermore, client software is required on the
client. Windows XP and Windows 2000 with Service Pack 3 or above do include the client
software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also
support WPA. Consult the product document for your wireless adapter and WPA client software
for instructions on configuring WPA settings.
To configure WPA, follow these steps:
Log in at the default LAN address of
1.
admin and default password of password, or using whatever LAN address and password you
have set up.
3-26
http://192.168.0.230
with the default user name of
Basic Installation and Configuration
202-10078-01
Advertisement
Table of Contents
