Viewing A List Of Attached Devices - NETGEAR WAG302 Reference Manual

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
Table 4-1. Statistics Fields (continued)
Field
Wireless 11b/g
Unicast Packets
Broadcast Packets
Multicast Packets
Total Packets
Total Bytes
Refresh button

Viewing a List of Attached Devices

The Available Wireless Station List contains a table of all IP devices associated with the wireless
access point in the wireless network defined by the Wireless Network Name (SSID). From the
main menu of the browser interface, under the Information heading, click the Available Wireless
Station List link to view the list, shown below.
For each device, the table shows the Station ID, MAC address, IP Address, and Status (whether the
device is allowed to communicate with the wireless access point or not).
Note that if the wireless access point is rebooted, the table data is lost until the wireless access
point rediscovers the devices. To force the wireless access point to look for associated devices,
click the Refresh button.
Note: A wireless network can include multiple wireless access points, all using the same network
name (SSID). This enables extending the reach of the wireless network and allows users to roam
from one access point to another, providing seamless network connectivity. Under these
circumstances, be aware that only the stations associated with this access point will be presented in
the Available Station List.
Management
Description
Received/Transmitted
The Unicast packets sent since the WAG302 was restarted.
The Broadcast packets sent since the WAG302 was restarted.
The Multicast packets sent since the WAG302 was restarted.
The Wireless packets sent since the WAG302 was restarted.
The Wireless bytes sent since the WAG302 was restarted.
Click the Refresh button to update the statistics on this screen.
202-10078-01
4-9