NETGEAR WAG302 Reference Manual page 53

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
If your network has a requirement to use a different IP addressing scheme, you can make those
changes in this menu. These settings are only required if the "Use this IP address" radio button
is chosen. Remember to click Apply to save your changes.
• Spanning Tree Protocol
Spanning Tree Protocol in enabled by default for the wireless access point. This provides
network traffic optimization in settings with multiple WAG302 Access Points.
• Time Zone
Select the time zone location for your setting.
Note: You must have an Internet connection to get the current time.
Basic Installation and Configuration
202-10078-01
3-31