Table of Contents
Advertisement
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
Table B-1:
Encryption Key Sizes
Encryption Key Size
64-bit (24+40)
128-bit (24+104)
Note: Typically, 802.11 access points can store up to four 128-bit WEP Keys but some 802.11
client adapters can only store one. Therefore, make sure that your 802.11 access and client
adapters' configurations match.
WEP Configuration Options
The WEP settings must match on all 802.11 devices that are within the same wireless network as
identified by the SSID. In general, if your mobile clients will roam between access points, then all
of the 802.11 access points and all of the 802.11 client adapters on the network must have the same
WEP settings.
Note: Whatever keys you enter for an AP, you must also enter the same keys for the client adapter
in the same order. In other words, WEP key 1 on the AP must match WEP key 1 on the client
adapter, WEP key 2 on the AP must match WEP key 2 on the client adapter, and so on.
Note: The AP and the client adapters can have different default WEP Keys as long as the keys are
in the same order. In other words, the AP can use WEP key 2 as its default key to transmit while a
client adapter can use WEP key 3 as its default key to transmit. The two devices will communicate
as long as the AP's WEP key 2 is the same as the client's WEP key 2 and the AP's WEP key 3 is
the same as the client's WEP key 3.
Wireless Channels
The wireless frequencies used by 802.11a/g networks are discussed below.
802.11b/g Wireless Channels
IEEE 802.11b/g wireless nodes communicate with each other using radio frequency signals in the
ISM (Industrial, Scientific, and Medical) band between 2.4 GHz and 2.5 GHz. Neighboring
Wireless Networking Basics
# of Hexadecimal Digits
10
26
202-10078-01
Example of Hexadecimal Key Content
4C72F08AE1
4C72F08AE19D57A3FF6B260037
B-7
Advertisement
Table of Contents
