Table of Contents
Advertisement
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
How to Configure WPA-PSK
Note: Not all wireless adapters support WPA. Furthermore, client software is required on the
client. Windows XP and Windows 2000 with Service Pack 3 or above do include the client
software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also
support WPA. Consult the product document for your wireless adapter and WPA client software
for instructions on configuring WPA settings.
To configure WPA-PSK, follow these steps:
Log in at the default LAN address of
1.
admin and default password of password, or using whatever LAN address and password you
have set up.
Click the WEP/WPA Settings link in the main menu of the WAG302.
2.
WEP/WPA Settings 11a menu
Figure 3-15: WEP/WPA Settings menus for 11a and 11bg
Choose WPA-PSK from the list.
3.
Enter the pre-shared key passphrase.
4.
Click Apply to save your settings.
5.
Basic Installation and Configuration
http://192.168.0.230
with the default user name of
WEP/WPA Settings 11b/g menu
202-10078-01
3-29
Advertisement
Table of Contents
