192.168.3.1
Figure 7-3: Client-to-Gateway VPN Tunnel
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the
DG834
Note: This section uses the VPN Wizard to set up the VPN tunnel using the VPNC
default parameters listed in
covered by these VPNC-recommended parameters, refer to
Tunnels in Special Circumstances" on page 7-35
Virtual Private Networking (Advanced Feature)
Reference Manual for the ADSL Firewall Router DG834
22.23.24.25
DG834
PCs
Table 7-2 on page
202-10005-05, June 2005
VPN Tunnel
7-5. If you have special requirements not
to set up the VPN tunnel.
0.0.0.0
PC
(Running NETGEAR
ProSafe VPN Client)
"How to Set Up VPN
7-7