Example Of Using Auto Policy - NETGEAR DG834 ADSL Firewall Router DG834 DG834 Reference Manual

This setting applies to both IKE and IPSec SAs. When configuring the remote endpoint to match
this setting, you may have to specify the "Key Group" used. For this device, the "Key Group" is
the same as the "DH Group" setting in the IKE section.

Example of Using Auto Policy

A
14.15.16.17
DG834 VPN Firewall
192.168.0.1
PCs
Figure 7-42: Gateway-to-Gateway VPN Tunnel
Set the LAN IPs on each DG834 to different subnets and configure each properly for the
1.
Internet. The following settings are assumed for this example:
Virtual Private Networking (Advanced Feature)
Reference Manual for the ADSL Firewall Router DG834
VPN Tunnel
202-10005-05, June 2005
B
22.23.24.25
DG834 VPN Firewall
192.168.3.1
PCs
7-41