How To Upgrade The Router Firmware - NETGEAR DG834 ADSL Firewall Router DG834 DG834 Reference Manual

How to Upgrade the Router Firmware

Note: NETGEAR recommends that you back up your configuration before doing a firmware
upgrade. After the upgrade is complete, you may need to restore your configuration settings.
Download and unzip the new software file from NETGEAR.
1.
The Web browser used to upload new firmware into the router must support HTTP uploads.
NETGEAR recommends using Microsoft Internet Explorer 5.0 or above, or Netscape
Navigator 4.7 or above.
Log in to the router at its default LAN address of
2.
of admin, default password of password, or using whatever User Name, Password and LAN
address you have chosen for the router.
From the Main Menu of the browser interface, under the Maintenance heading, select the
3.
Router Upgrade heading to display the menu shown in
Figure 5-2: Router Upgrade menu
In the Router Upgrade menu, click the Browse to locate the binary (.BIN or .IMG) upgrade
4.
file.
Click Upload.
5.
Note: When uploading software to the router, it is important not to interrupt the Web
browser by closing the window, clicking a link, or loading a new page. If the browser is
interrupted, it may corrupt the software. When the upload is complete, your router will
automatically restart. The upgrade process will typically take about one minute. In some
cases, you may need to clear the configuration and reconfigure the router after
upgrading.
Managing Your Network
Reference Manual for the ADSL Firewall Router DG834
http://192.168.0.1
202-10005-05, June 2005
with its default User Name
Figure 5-2.
5-3