Vpn Process Overview; Network Interfaces And Addresses; Interface Addressing - NETGEAR DG834 ADSL Firewall Router DG834 DG834 Reference Manual

Reference Manual for the ADSL Firewall Router DG834

VPN Process Overview

Even though IPSec is standards-based, each vendor has its own set of terms and procedures for
implementing the standard. Because of these differences, it may be a good idea to review some of
the terms and the generic processes for connecting two gateways before diving into to the
specifics.

Network Interfaces and Addresses

The VPN gateway is aptly named because it functions as a "gatekeeper" for each of the computers
connected on the Local Area Network behind it.
In most cases, each Gateway will have a "public" facing address (WAN side) and a "private"
facing address (LAN side). These addresses are referred to as the "network interface" in
documentation regarding the construction of VPN communication.

Interface Addressing

This Appendix uses example addresses provided the VPN Consortium. It is important to
understand that you will be using addresses specific to the devices that you are attempting to
connect via IPSec VPN.
10.5.6.0/24 172.23.9.0/24
VPNC Example
Network Interface Addressing
Gateway A Gateway B
14.15.16.17 22.23.24.25
LAN IP LAN IP
WAN IP WAN IP
10.5.6.1 172.23.9.1
FVL328
DG834
Figure D-4: VPNC Example Network Interface Addressing
It is also important to make sure the addresses do not overlap or conflict. That is, each set of
addresses should be separate and distinct.
Virtual Private Networking D-7
202-10005-05, June 2005