NETGEAR DG834 ADSL Firewall Router DG834 DG834 Reference Manual page 219

Figure E-16: Security Policy Editor Connection settings
Select Secure in the Connection Security check box.
c.
Select IP Subnet in the ID Type menu.
d.
In this example, type 192.168.0.1 in the Subnet field as the network address of the DG834.
e.
Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the DG834.
f.
Select All in the Protocol menu to allow all traffic through the VPN tunnel.
g.
Select the Connect using Secure Gateway Tunnel check box.
h.
Select Domain Name in the ID Type menu below the check box and enter
i.
fromDG834G.com (in this example).
Select Gateway Hostname and enter ntgr.dyndns.org (in this example).
j.
The resulting Connection Settings are shown in
k.
Configure the Security Policy in the DG834 ADSL Firewall Router software.
3.
In the Network Security Policy list, expand the new connection by double clicking its
a.
name or clicking on the "+" symbol. My Identity and Security Policy subheadings
appear below the connection name.
NETGEAR VPN Configuration
Reference Manual for the ADSL Firewall Router DG834
ntgr
Figure
202-10005-05, June 2005
E-16.
E-19