NETGEAR DG834 ADSL Firewall Router DG834 DG834 Reference Manual page 218

Reference Manual for the ADSL Firewall Router DG834
If you do not have a modem or dial-up adapter installed in your PC, you may see the
b.
warning message stating "The NETGEAR ProSafe VPN Component requires at least
one dial-up adapter be installed." You can disregard this message.
Install the IPSec Component. You may have the option to install either the VPN Adapter
c.
or the IPSec Component or both. The VPN Adapter is not necessary.
The system should show the ProSafe icon (
d.
Double-click the system tray icon to open the Security Policy Editor.
e.
Add a new connection.
2.
Run the NETGEAR ProSafe Security Policy Editor program and create a VPN
a.
Connection.
From the Edit menu of the Security Policy Editor, click Add, then Connection. A New
b.
Connection listing appears in the list of policies. Rename the New Connection so that it
matches the Connection Name you entered in the VPN Settings of the DG834 on
Gateway A.
Note: In this example, the Connection Name used on the client side of the VPN tunnel is
toDG834G and it does not have to match the VPN_client Connection Name used on the
gateway side of the VPN tunnel (see
arbitrary to how the VPN tunnel functions.
Tip: Choose Connection Names that make sense to the people using and administrating
the VPN.
Figure E-15: Security Policy Editor new connection
E-18
) in the system tray after rebooting.
Figure E-16) because Connection Names are
202-10005-05, June 2005
NETGEAR VPN Configuration