If Output; Internal Clock/Calendar - Whistler WS1080 Owner's Manual

USING THE IF OUTPUT
Using the IF Output
Your WS1080 can provide its IF/discriminator output
signal to the headphone jack. The IF/discriminator
output is unsquelched and unfiltered, making it ideal
for third party signal analysis and decoding software
and hardware.
To activate IF Output mode:
1. Press Menu.
2. Scroll to the Settings menu. Press
3. Scroll past the Expert section to the IF Out setting.
4. Press the
Off = disables the IF output function.
HP = routes the IF/discriminator signal to the
headphone jack.
HP/SP = routes the IF/discriminator signal to the
headphone jack and the speaker.

Internal Clock/Calendar

Your WS1080 includes a real time clock/calendar that is
used to correctly date and time stamp recorded audio
files. The first time you power on your WS1080, you will
be prompted to set the time and date.
If batteries are allowed to fully discharge, or if they
are removed from the WS1080 for more than a few
minutes, the date and time will need to be set again.
You can also set the date and time over the USB
connection using the EZ Scan Software, or directly
on the radio using the Set Clock function in the Main
Menu.
to scroll through the available options:


34
to continue.