Alert Led - Whistler WS1080 Owner's Manual

Alert LED Settings
The Alert LED has been enhanced for the WS1080.
These enhancements provide powerful new
capabilities for customizing the Alert LED, giving you
even more flexibility to show unique colors and flash
patterns when transmissions are received on important
talkgroups and channels. The following program charts
are examples of how the Alert LED can be configured
to produce unique and noticeable effects and colors.
1. Press Menu.
2. Select Browse Objects.
3. Use the
4. Use the
selected Scanlist.
5. Press MENU to enter object options. (options are
shown in the following examples) Scroll till "Flash
Pattern" is shown and press the
6. A list of 8 characters are displayed (55555555).
Adjust each one to obtain the flash pattern
desired. Options are 0-9 and A-F. See Flash
pattern chart for how each number/letter will
control the Alert LED.
7. Once set press SEL to accept the flash rate.Press
 to import the items. (This may take several
minutes.)
0:
1:
2:
3:
4:
5:
6:
7:
EXAMPLE: Using the above chart with pattern 3B3B3B3B, the LED
pattern for "3" is "off/off/on/on" and the LED pattern for "B" is "on/
off/on/on." With this selection the Alert LED will flash back and forth
between "off/off/on/on" and "on/off/on/on." The flash pattern goes in
order from left to right.
NOTE: Both the flash rate and color options are in hexadecimal format.
ALERT LED SETTINGS
to select a Scanlist.
 or 
to select an object within the
or
=on
.
8:
9:
A:
B:
C:
D:
E:
F:
=off
27