Ez Scan Library - Whistler WS1080 Owner's Manual

Battery status indicator
External power connected
P/p
Priority On/Priority Off
S/s
Skip On/Skip Off
D/d
Delay On/Delay Off
L/-
Lock Out On/Lock Out Off

EZ Scan Library

Your scanner comes with an installed MicroSD card
that contains the entire USA/Canadian RadioReference
database as well as the EZ Scan software. Note: Make a
copy of the EZ Scan software files in case the SD card is
lost or damaged.
To remove the MicroSD card from the scanner:
WARNING: To prevent corrupted data on the SD
Card, always turn the scanner off using the front panel
power key before opening the battery compartment
cover.
1. Turn off scanner, unplug external power, and
remove the batteries.
2. Press and release the MicroSD card.
3. To reinsert the MicroSD card, with the label
facing the front of the radio press it in until it clicks
in place.
NOTE: Always use the EZ Scan software "Prepare
Scanner Memory/SD Card For Use" option under the
"Scanner/ SD Card" menu to format the SD Card if the
card is not performing as expected or if the scanner
does not power up with the SD Card.
The MicroSD card comes formatted for the standard
FAT file system with a cluster size of 32k.
To format additional cards (2GB or smaller), use only the
EZ Scan software to format the SD card.
• Format using the FAT file system with 32k clusters.
DISPLAY
20