Search Settings; Spectrum Sweeper; Service Search; Limit Search - Whistler WS1080 Owner's Manual

Search Settings

To change search settings, press MENU while the
search is active.
Spectrum Sweeper Settings
• Atten – Attenuation. On or Off.
• Zeromatic – On or off.
• Delay – How long scanner waits after a
transmission before resuming.
• Special Mode – Skips 1 MHz block where you have
skipped five or more frequencies. Special Mode
is useful when you are close to many high-power
transmitters that are close together in frequency.
• Frequency Ranges – Defines a frequency range to
focus a search.
Service Search Settings
• Atten – Attenuation. On or Off.
• Zeromatic – On or off.
• Delay – How long scanner waits after a
transmission before resuming.
• Frequency Ranges – Defines a frequency range to
focus a search.
• Rx Mode – Set the RX modulation mode to
automatic, or forces AM mode or FM mode. RX
Mode functions in Aircraft and Amateur bands,
Press  or  to change.
Limit Search Settings
• Atten – Attenuation. On or Off.
• Zeromatic – On or off.
• Delay – How long scanner waits after a
transmission before resuming.
• Lo – Lowest frequency in the search range.
• Hi – Highest frequency in the search range.
SEARCH SETTINGS
41