Whistler WS1080 Owner's Manual page 38

SCANLISTS and SCAN SETS
Scanlists and Scan Sets
In the Main Menu's Scan Sets function, scroll to a Scan
Set that you wish to configure. Note that you can
give the Scan Set a meaningful name by pressing the
key, then following the onscreen instructions to

change the Scan Set name. Press the SEL key to save
your changes.
Press the MENU key to configure the Scan Set
members. Scroll through the Scanlists and use the SEL
key to add a checkmark next to each Scanlist that you
want included as a member of the Scan Set. When
finished, press the MENU key to return to the listing
of Scan Sets. Repeat this process for each Scan Set you
wish to define and use.
To exit the list of Scan Sets, press the key.

To begin scanning with Scan Sets, use the Main
Menu's Scan Sets function to scroll the list of Scan
Sets and place checkmarks next to each Scan Set you
wish to scan using the SEL key. You can remove an
individual Scanlist from the set by disabling it in the
Main Menu's Scanlists function, but remember, it will
need to be re-enabled when you want to scan it again.
38