Set Bandplan And Clock - Whistler WS1080 Owner's Manual

SETTING BANDPLAN AND CLOCK
Setting Bandplan and Clock
When you first power up your WS1080 it will prompt you
to set the bandplan, date and time.
Press the or

bandplan, then press
-Bandplan-

Press SEL to Set
The WS1080 will then prompt you to enter the
current date and time. Press the
the desired digit, then press the
or key to change the value, then press
 
You can skip this process by pressing the SKIP key.
You can set the clock at any time using the EZ Scan
Software.
-Set Clock-
2014-06-03 Sat
11:00:25
Press SEL to Set
or SKIP to Exit
The Bandplan and Date/Time prompts appear only
once on initial power-up. You can change the Date and
Time from the Main Menu and the Bandplan from the
Setting menu.
key to select the USA or Canada

/II/SEL.


USA
-Bandplan-

Canada
Press SEL to Set
or

key. Press the the

13

key to select

/II/SEL.
