Setting Location - Whistler WS1080 Owner's Manual

SETTING LOCATION

Setting Location
Your WS1080 can select services to scan based on your
location. Press MENU and scroll to "Set Location" and
press the key.

You can specify your location by City, County or ZIP
Code. Scroll to the desired method and press the
key. If you select City or County, the WS1080 will

prompt you for your State. Use the key to select
or
/II/
the first letter of your State, then press the

SEL key. Scroll to your state and press the
key. Use

the key to select the first letter of your City or
or
/II/SEL key. Scroll to your City
county, then press the

or County, then press the key.

Select County:
First letter: A
SEL = Done
If you select ZIP Code, the WS1080 will prompt you
to enter your five-digit ZIP Code. Use the key
or
to adjust each digit, then use the or key to select
 
each digit. When you are done, press the
/II/SEL key.

ZIP Code
00000
moves cursor
SEL=OK MENU=BACK
NOTE: Although you can program multiple locations,
to get maximum scanner performance its best to
program only 1 location or ZIP code. Scanning
multiple locations will cause missed transmissions due
to the scanner searching for out of range frequencies.
15