Whistler WS1080 Owner's Manual page 47

CONFIGURATION SETTING
• Blink Time 1-2 – Controls the amount of time
each item is displayed.
• Show Radio ID – Displays the Radio ID for trunked
systems, if available.
Tag Only.
• Use RID Alert – Controls alert for Radio ID
transmissions.
• Show VC/CC – Displays voice and control channel.
Simple Display must be unchecked. Show Radio
ID will override if available.
• Show TGID – Displays talkgroup ID. Simple
Display must be unchecked.
• Show Site Name – Displays trunking site name,
only if two or more trunking system sites are
programmed. Simple Display must be unchecked.
• CONV TGID – Displays the talkgroup ID for P25
conventional talkgroup calls. Simple Display must
be unchecked.
• CONV Radio ID – Displays the Radio ID for P25
conventional calls. Simple Display must be
unchecked.
• PC/IF CCDump – Streams ASCII Control Channel
Dump data over the USB interface for trunking
control channels.
To file – Stores ASCII Control Channel Dump
data to the MicroSD card.
Limit 100
Trim Logs
• Low Batt Time – Interval (seconds) between
low-battery alert sounds.
• Charge Time – Sets the radio charge time.
• TG Disp – Display format for talkgroup IDs.
• M36 Stat Bits – Uses status bits to track Motorola
3600 baud trunking talkgroup calls.
• M36 ENC
• EDACS Dig
47