If Output - Whistler WS1080 User Manual

3. While playing a file, the  and  keys set the
playback volume, and the  or  keys move
backward and forward in the file being played in
five second increments. The SKIP key ends
playback of the current file.
4. After scrolling to a file, you can press the MENU key
for a list of playback options.
Main Menu jumps to the Main Menu.
• Back jumps back to the list of recorded files.
• Play From Here plays the current recording and all
recordings afterwards.
• Delete All deletes all recorded audio files.
• Delete Earlier deletes recorded audio files prior to
the selected audio file.
• Delete Later deletes the selected audio file and all
recorded audio files after the selected file.
The EZ Scan Software includes advanced audio file
playback and management features in addition to the
audio playback and management features in the radio.
Using IF Output
Your scanner can provide its IF/discriminator output
signal to the headphone jack. The IF/discriminator
output is unsquelched and unfiltered, making it ideal for
third party signal analysis and decoding software and
hardware.
To activate IF Output mode:
1. Press MENU.
2. Scroll to the Program Menu, Press SEL, Global
Settings, Press SEL to continue.
3. Scroll past the Expert section to the IF Out setting.
4. Press the  to scroll through the available options:
Off = disables the IF output function.
HP = routes the IF/discriminator to the headphone jack.
HP/SP = routes the IF/discriminator signal to the
headphone jack and the speaker.
44