Record Schedule - Samsung SHR-2042 User Manual

SHR-2040/2041/2042-ENG-1
SHR-2040/2041/2042 USER'S MANUAL
6

Record Schedule

5-25
2005.6.29 4:59 PM
This setup selects a time to record automatically.
Selection by the day or by the time is available.
The default value is set to "Event Record".
Press "CH >" copies the value of Channel 1 to all the channels.
The horizontal axis numbered from 0 to 23 represents the time value.
The vertical axis numbered from S to H represents the day value. (H : Holiday)
Selection by the day or by the time is available.
Pressing "ALL" converts the overall setting of the selection window into
Continuous Event Record
Record Schedule
Recording starts automatically on the preset time.
Recording follows the condition that set in 5-18.Record Mode.
Refer to 7-2 Record Schedule.
Event Recording
Recording starts automatically when an event (Alarm/Motion Detection/Video Loss)
occurs within a setup time.
Recording follows the condition that set in 5-20.Event Record Mode setup.
Refer to 7-3 Event Recording.
Schedule Record is yellow, Event Record is Blue, and Schedule/Event
Record is red.
Page 5-25
Schedule/Event Record.