Panel Layout; The Front Panel - TP-Link TD-w8960n User Manual

TD-W8960N

1.3 Panel Layout

1.3.1

The Front Panel

The router's LEDs are located on the front panel (View from left to right).
LED Explanation:
Name
(Power)
(ADSL)
(Internet)
(Wi-Fi)
(WPS)
(LAN1-4)
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 1-1
Status
On
The modem router is powered on.
The modem router is off. Please ensure that the power adapter is
Off
connected correctly.
On
ADSL line is synchronized and ready to use.
Flash
The ADSL negotiation is in progress.
ADSL synchronization fails. Please refer to
Off
troubleshooting.
On
The network is available with a successful Internet connection.
There is no successful Internet connection or the modem router
Off
is operating in Bridge mode. Please refer to
troubleshooting.
On
Wireless is enabled.
Flash
The modem router is sending or receiving data over Wi-Fi.
Off Wireless is disabled.
A wireless device has been successfully added to the network by
On
WPS function.
WPS handshaking is in process and will continue for about 2
Flash minutes. Please press the WPS button on other wireless devices
that you want to add to the network while the LED is flashing.
The WPS function is disabled or the wireless device fails to be
Off added to the network in 2 minutes after WPS function is enabled.
For more information, please refer to
On
There is a device connected to this LAN port.
The modem router is sending or receiving data over this LAN
Flash
port.
Off
There is no device connected to this LAN port.
Indication
4
Note 1
Note 2
WPS Setup.
for
for