TP-Link TD-w8960n User Manual page 74

TD-W8960N
 WPA2 Preauthentication: Select Enable from the drop-down list, Stations will authenticate
with the AP during the scanning process, and once association is required, the station has
been already authenticated.
 Network Re-auth Interval: Enter a value in seconds as the frequency interval to enable
periodic Network Re-authentication function, while leave it blank or enter "0" to disable it.
5. WPA2 -PSK
To configure WPA2 -PSK settings, select the WPA2 -PSK option from the drop-down list. The
menu will change to offer the appropriate settings. WPA2 -PSK requires a shared key and does
not use a separate server for authentication. PSK keys can be ASCII or Hex type.
6. Mixed WPA2/WPA
To configure Mixed WPA2/WPA settings, select the Mixed WPA2/WPA option from the drop-down
list. The menu will change to offer the appropriate settings. The steps to these settings are similar
to those for WPA-PSK.
7. Mixed WPA2/WPA -PSK
To configure Mixed WPA2/WPA -PSK settings, select the Mixed WPA2/WPA -PSK option from the
drop-down list. The menu will change to offer the appropriate settings. The steps of this setting are
the same with WPA-PSK.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-81
Figure 4-82
66