Iptv; Wireless; Basic - TP-Link TD-w8960n User Manual

300mbps wireless n adsl2+ modem router

Hide thumbs Also See for TD-w8960n:

Table of Contents

TD-W8960N

4.5 IPTV

Enable IPTV: Check this box to enable IPTV. If you enable IPTV, please make sure the



following settings are correct.

VPI (0-255): Identifies the virtual path between endpoints in an ATM network. The valid range



is from 0 to 255. Please input the value provided by your ISP.

VCI (1-65535): Identifies the virtual channel endpoints in an ATM network. The valid range is



from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value

provided by your ISP.

Click the Save/Apply button to save your settings.

Choose "Wireless", there are six submenus to configure Wireless LAN settings. Click any of them,

and you will be able to configure the corresponding function. The detailed explanations for each

submenu are provided below.

4.6.1

Choose "Wireless""Basic", you will see the screen of Wireless--Basic settings shown as below.

The basic settings for wireless networking are set on this screen.

300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-60

Table of Contents