TP-Link TD-w8960n User Manual page 49

TD-W8960N
Select the Enable QoS checkbox to enable all QoS for all interfaces, and click Save/Apply to
save the current configuration.
4.4.8.1 Queue Config
Choose "Advanced Setup""Quality of Service""Queue Config", you can set up virtual
servers on the screen below.
Click the Add button in Figure 4-41, and you can configure the QoS queue entry on the next
screen as shown in Figure 4-42.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-40
Figure 4-41
41